The software package called NTP (Network Time Protocol) is an implementation of the network protocol. NTP has been initiated in the 1980’s to achieve a high accuracy time synchronization for computers across the network. The protocol supports an accuracy of time down to nanoseconds depending on the operating system and the network performance.

LANTIME is Meinberg’s family of ready-to-run Network Time Protocol (NTP) server appliances, ideal for synchronizing networks of any size. Choose between several different external references sources such as globally available satellite systems GPS, GLONASS, future planned also Beidou and Galileo, Central European DCF77 and IRIG.

Even if your desired installation location prevents consistent reception of external signals, our highly stable, free running clocks can be deployed to keep your network in sync. Add our NTP synchronized displays to create a fully-featured time and synchronization solution optimized for environments such as control rooms or operation centers.

Download Meinberg NTP software package

 

LANTIME M200

Compact NTP Time Server with integrated Reference Clock

LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in MEINBERG radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.

Key Features

• Selectable Reference Sources:
  • GPS: Satellite receiver for the Global Positioning System
  • GNS: Combined GPS/GLONASS/Galileo/BeiDou satellite receiver (L1 frequency band), can also be used for mobile applications
  • PZF: DCF77 correlation receiver for middle europe
  • MSF: Long wave receiver for Great Britain
  • WWVB: Long wave receiver for the US time signal
• Synchronization of NTP and SNTP compatible clients
• Web-based status and configuration interface (Demo) and console-based graphical configuration utility
• Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP, SSH, SCP, SYSLOG, SNMP, TIME, TELNET
• Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
• Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
• USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of configuration and log files
• Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58

 

LANTIME M300

NTP Server in 1U Case for Server Rackmount

The Meinberg LANTIME M300 time server provides accurate time to networks of any size. It synchronizes all NTP- or SNTP-compatible systems. The M300 time server uses as a reference time source either any compatible external or built-in Meinberg reference clock (Stratum 1 mode) or up to 7 NTP servers (Stratum 2 mode).

Key Features

• Selectable Reference Time Sources:
  • GPS: Satellite receiver for the Global Positioning System
  • GNS: Combined GPS/GLONASS/Galileo/BeiDou satellite receiver (L1 frequency band), can also be used for mobile applications
  • PZF: DCF77 correlation receiver for middle europe
  • MSF: Long wave receiver for Great Britain
  • WWVB: Long wave receiver for the US time signal
  • TCR: Time code receiver for IRIG A/B, AFNOR or IEEE1344 codes
  • MRS: (GPS, PPS, 10MHz, NTP): Multi Reference Source – several reference sources, adjustable following priority of signal
  • RDT: (external PPS or NTP): Time Server without internal receiver module
• Synchronization of NTP and SNTP compatible clients
• Web-based status and configuration interface (Demo) and console-based graphical configuration utility
• Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP, SSH, SCP, SYSLOG, SNMP, TIME, TELNET
• Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
• Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
• USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of configuration and log files
• Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
• Meinberg’s LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesizer and programmable pulse outputs illustrate some of the many expansion options for your server
• Two (standard) or optional up to six independant RJ-45 ethernet interfaces 10/100 MBit

 

LANTIME M600

High End NTP Time Server

The Meinberg LANTIME M600 time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses an integral Meinberg reference clock as its time source to synchronize all timing outputs with the utmost accuracy. The front panel includes a VF Display and keypad for easy configuration, and indication of the receiver and NTP subsystem status. A high quality precision OCXO is standard in the M600, to allow this time server to meet the stringent holdover requirements.

Key Features

• Selectable Reference Sources:
  • GPS: Satellite receiver for the Global Positioning System
  • GNS: Combined GPS/GLONASS/Galileo/BeiDou satellite receiver (L1 frequency band), can also be used for mobile applications
  • MRS: (GPS, PPS, 10MHz, NTP): Multi Reference Source – several reference sources, adjustable following priority of signal
• Synchronization of NTP and SNTP compatible clients
• Web-based status and configuration interface (Demo) and console-based graphical configuration utility
• Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP, SYSLOG, SNMP
• Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
• Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
• USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of configuration and log files
• Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
• Meinberg’s LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesizer and programmable pulse outputs illustrate some of the
• many expansion options for your server
• Four independent network interfaces (standard configuration)
• Option: 5 network ports and one IEEE 1588 interface (also see PTPv2 Grandmaster)
• One 10/100 MBit interface for LANTIME management and three network ports withGigabit Support (3GE)

 

SyncFire 1100

High-Performance NTP Time Server

The Meinberg SyncFire 1100 Time Server appliance offers the flexibility and reliability of the Meinberg LANTIME M-Series Product Family in a new package that is optimized for Data Center deployments. Due to its new powerful CPU options, it can synchronize millions of NTP and SNTP clients.

Key Features

• Selectable Reference Sources:
  • GPS: Satellite receiver for the Global Positioning System
  • GLN: Combined GPS/GLONASS satellite receiver (L1 frequency band), can also be used for mobile applications
• Synchronization of NTP and SNTP compatible clients
• Web-based status and configuration interface (Demo), and console-based graphical configuration utility
• Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP, SYSLOG, SNMP
• Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
• Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
• Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
• Up to six independent RJ-45 ethernet interfaces 10/100/1000 MBit/s
• Max. supported NTP requests/second
  Multi-Core-NTP: up to 750,000
  Multi Threading Support developed by Meinberg